Bolt

If it were possible for the author to move into my home and provide on the job training while I attempt to parent my ADD kid, it would be perfect. However this isn't a perfect world, and I have to settle for his book...the next best arrangement. This is truly the best book I have ever read on this subject. I laughed and cried. Mr. Jacob tells a story in a way that is just so different. If you are a Mom or a Dad or just a human with an interest in what it's like to raise a kid that truly marches to a different drummer...buy this book!

Having been personally touched by this dissorder, I was pleasantly surprised to find this book by Mark Jacob. I have a nephew and a friend both suffering from this condition for many years. I enjoyed the frankness and the flow of this book that gave me a better understanding of what I have been witnessing for the last 15 years. Recalling back all the situations I have witnessed over this time literally brought me to tears. These children when calm, are wonderful and bright. They deserve more than the system seems to be dishing them out. This book gave me greater insight into the problems of the people I love and hope that Mr. Jacob succeeds with his quest to help us understand ADD better. Thank you Mark for helping us. I look forward to the next addition.

My wife gave me this book and though I was reluctant to read it, it has become my "bible". This IS a toolbox for life with an ADD child and I highly recommend it to all Dads (and Moms) of ADD children.

...This book is indispensible. It's written for the race car driver who does at least a little bit of their own fabrication. And that's almost any club driver, and many entry-level pro drivers. Making sure additions to the car stay put, supsension bits adequately bear their loads and stresses, and repairing these things in a pinch, is no small part of winning races.

This book doesn't explain everything ther is to know about fasteners. And it isn't dripping with technical detail; ...

But this book does provide something more valuable: explanations. It looks at a couple dozen of the most popular fasteners in each category and explains why a fabricator or mechanic would or would not want to use them. Carroll uses his incredible experience and approachable, conversational writing type to discusses their strengths and weaknesses, applications, and design.

I think the book isn't limited to racing applications; it's useful for anyone who works metal, and will offer something of value to anyone who's ever tried to replace a fastener in an emergency. Were you overwhelmed when you went through the fastener aisles in your local hardware store or home supply center? This book can help.

The book is a little weak in two areas. First, there's few pages devoted to plumbing. Of course, this is about real plumbing: laying lines and connecting them with pressure-tight fasteners. It explains Army-Navy fasteners and their applications, and discusses all the subtleties of pipe flange fitting. The book isn't about stopping a leak behind your toilet.

Next, the book is showinng its age. It doesn't treat some of the materials that were not exactly commonplace ten or more years ago, but are quite common now. For instance, I can buy titanium lug bolts for my car. (Well, I could, if I had a spare $500 lying around.) Carroll doesn't make much mention of the more interesting alloys being used more commonly in fasteners these days. He also doesn't spend much time discussing the material to be fastened: holding down a carbon fiber body panel is different than getting the same bit fabricated from fiberglass to hold. Some of the illustrations look like they were drawn by a plotter 20 years ago: terrible resolution, confusing lines, poor perspective. Freshening some of the illustrations would be a real shot in the arm for the book.

Those shortcomings withstanding, I can't give this book less than five stars. Mr. Smith's incredible reputation and outstanding experience hold up a dry subject, and give the reader more background than a broader (or deeper) technical reference ever could.

Admittedly this is a dry subject, but this book should be considered required reading for anyone who is serious about building a safe race car. There's more to fastener technology than most of us realize and a right and wrong way to do things. Mr. Smith gets the information out in an easy to understand format with splashes of well-timed humor. While we have all blamed a poor performance at an event on a broken fastener, Mr. Smith explains how to eliminate these problems, plus your vehicle will be safer. You won't even think about using grade 8 bolts from the discount hardware store on that flywheel after reading this book. The section on plumbing was particularly helpful to me.

Fabulous book on fasteners. Up front it sounds really dull, but C.Smith makes it painless. You will find out things here that simply are not available elsewhere. Must reading for people into cars, airplanes or machinery in general

"This fieldguide is for all change champions who are learning about, seeking to, or who are in the midst of leading social or organizational change...The purpose of this fieldguide is to provide you with all of the necessary elements to implement a best practice change or leadership development initiative within your organization or social system. Contributors in this book are widely recognized as among the best in organizational change and leadership development. They provide invaluable lessons in succeeding during crisis or growth modes and economies...Within the forthcoming chapters, you will learn:

*Key elements of leading successful and result-driven change

*Tools, models, instruments, and strategies for leading change

*Trends and research on innovation, change and leadership

*Critical success factors and critical failure factors

*How to design, implement, and evaluate change and leadership initiatives (pp.viii-xi)".

In this context, D. Ulrich, M. Goldsmith, L. Carter, J. Bolt, and N. Smallwood (the editors) divide this invaluable book including twenty-two chapters of 'best practice' into three sections: (1). Transformational and Large Scale Change, (2). Fundamentals of Leading Change, (3). Transformational Leadership and Sustaining Results. They say, "we have different interests, clients, and approaches. We have each experienced successes and failures while hoping only for success. The failures were almost always failures to make correct assumptions about the fit between type of intervention, organizational system, and situation. It is these failures that help us learn; they make us humble and open our minds to different approaches...This fieldguide presents you with an array of choices for how to approach many complex situations. You will find many ideas that you can adapt to your own situation and needs. And, when you do lead change, lead with the same passion, humility, creativity, and commitment to stakeholders, customers, and excellence that have been exhibited by the change champions contributing to this book (from the Introduction)."

In the last chapter of the fieldguide, 'You Can't Be a Champion Unless You Keep Score,' John Sullivan focuses on importance of measuring results. He says that "If this were the Olympics, it would be obvious to all that you couldn't become a champion without measuring results. In fact, the definition of a champion is 'the one with the best results.' In the general business world the use of numbers and metrics is part of life...Within all major firms all projects, products, and business units are evaluated on the basis of numerical results. However, in direct contrast, we within HR resist using metrics, almost like developing them was the equivalent of a root canal...The Watson Wyatt Human Capital Index study demonstrated that the potential impact of people programs on a firm's overall market value could be as high as 47 percent. The road is clear and the time is right. HR must now seize this unprecedented opportunity to adopt metrics and to become the next 'corporate hero' (pp.279-283)"

Therefore, after saying "metrics are the fastest and the cheapest way to change behavior in business," he demonstrates:

I.Nine reasons to utilize metrics: (1). Meeting your goals, (2). Driving improvement, (3). Obtain funding, (4). Early warning a.k.a 'smoke detectors,' (5). Understanding critical success factors, (6). Shift to fact-based decisions, (7). Metrics change behaviors, (8). Eliminate confusion, (9). Builds coordination/cooperation.

II.Eight steps in developing metrics: (1). Select a metric for each program goal, (2). Choosing between soft and hard metrics, (3). Understanding the different categories of business impact, (4). Selecting simple but attention-getting metrics, (5). Understanding the characteristics of great measures, (6). Selecting from standard HR metrics, (7). Selecting from advanced metrics, (8). Building the business case for increased HR funding.

III.Eleven decision factors for approving HR projects: (1). A low initial investment, (2). The project has a high ROI, (3). Similar projects implemented elsewhere have a high success rate or a low risk of failure, (4). The project starts right away without a long delay, (5). There is a short payback period, (6). The project has a complete set of accurate results metrics and a method for collecting metric information, (7). No new headcount is required, (8). The project has negative consequences for failure built in, (9). The program gives us a competitive advantage over other firms, (10). The program can demonstrate that it increases worker productivity, (11). A project team is credible and has high success rate on previous projects.

Finally, Sullivan writes, "HR professionals understand that the world of business has recently lost its tolerance for decisions made without facts and for programs that don't produce measurable results...Metrics can provide you with the opportunity to be superior performer by letting you know unambiguously where you are and how far you have to go. Your future path is clear; you can't become a champion...without measuring your results (pp.297-298)."

I highly recommend this invaluable fieldguide to all change champions of the future.

This is like a conference within a book without the travel and expense - I learned from the top thought leaders in the field such as David Cooperrider - the creator of Appreciative Inquiry, Marshall Goldsmith - one of the world's top coaches and experts on behavioral change, Jerry Sternin - the founder of applied positive deviance, Louis Carter - one of the foremost experts in best practices in leadership and organization development, Kathleen Dannemiller - the creator of whole scale change, Dave Ulrich - one of the world's top 5 management educators ranked by Business Week, Lawrence Susskind - the Director of the Consensus Building Institute at MIT/Harvard, the well known futurist Ryan Matthews, the world's leading expert in succession planning Dr. William Rothwell, Dr. W. Warner Burke, the award winning teacher and consultant and many more! Any organization that does not have a copy of the fieldguide in their organization will seriously lack competitive advantage.

This book is an absolute steal for the price. It is extremely generous in the information it provides. There are 22 chapters of the best theories, practices, and examples in change/business management and leadership/organization development -- with an eye towards getting results that matter for you and your organization. This book has already helped me to make my job more valuable inside of my organization - as well as helped me to better understand how to get my ideas implemented faster - and improved my chances of getting a promotion! Thank you to the publisher and editors for providing me with a book that has far exceeded my expectations.

I feel that in many ways this is the ultimate book for a CEO or leader. I jokingly told one of my CEO clients, "Read this book and you won't have to read any others and you can throw away the ones you have read!" The inclusion of the CD is a special plus and the many forms and tools make this an ACTION book. I have heard Kraig speak and he is a zealot about leadership tools and it certainly comes across in this jam packed book. Each of his Top Ten lists stand on their own and are very powerful. It is the kind of book that you could keep on your desk and use as a reference each time you are dealing with one of the primary areas of your business. Every CEO should own this book!

Kraig in a true professional, his body of work and his contribution and skills have helped make American capitalism what it is today, the best and mose powerful force in the world.

It's about time we all have access to a book of Kraig's wisdom. His principles have helped me be a better and more successful CEO. I live by Kraig's advice in the business I run daily, and it works. Kraig, thank you for helping me build wealth and success for my family and me. And lastly, congratulations on creating such a great body of practical and powerful advice in one place, a book called CEO Tools: The Nuts-n-Bolts of Business for Every Manager's Success.

This is a TERRIFIC book for any manager and especially small business owners! It is filled with real world, easy to use, proven tools to make good things happen, including more profits. Here's a guy who has done it all and boiled down the real secrets into not only an easy book to read but to understand how to make what he has learned work in my business. There is even a CD included that I used to put my own business data into and work his secrets on my problems. WOW! I learned more useable stuff from this one book than dozens of others I have read. Buy it now! You will not be disapointed.

This book is full of great songs, and they are simple to play in terms of basic fingering. The hard part is the mastering of the speed of many of these songs, which takes several years of serious practice and study. This is why the book is great because these songs sound good at slower speeds and so you can enjoy them at a novice level. At the same time, you can use them to develop skills in speed and grace by repeated practice.
I strongly suggest getting the issue of this book that has the CD of the songs, played by Ben Bolt, included. It will help you realize how you should sound playing them after several years of practice. All the while, as I said, they sound nice at the novice level too.

I had learned about 4 or 5 chords for the guitar but wanted to learn to play real classical guitar. I bought this book and a guitar without any knowledge of reading music or playing. And about half an hour after starting with this book I could pick out the first song. Within weeks I had learned 6 fantastic classical guitar songs!

The book progresses perfectly for a beginner and each song brings a new challenge that is easy to master. The music is SO EASY to read using the tablature notation. It is a must have if you are learning on your own.

I recommend this book to anyone who has wanted to learn to play the classical guitar but has been frustrated by hard lessons or overly advanced teachers. Or just scared of the daunting challenge of learning what seems to be a difficult instrument.

This is the first book I used, a few years ago, when I switched from rock to classical guitar. The pieces are nicely arranged, and fun to play. Whether your a guitarist interested in playing classical or an absolute beginner, this is a good book to start with.

Barbara Damrosch and her husband, Eliot Coleman, are the type of teachers that I find the most helpful. They stand in your shoes and ask what would I want to know on this subject, then proceed to tell you precisely and in plain language, not only what you want to know but what you didn't even know to ask.

I've taped all their television shows on gardening and have a number of the books both of them have written, but when I walk out in the garden and see a problem, whether it be disease or bug, it is this book that is my guide. I also grab it whenever I'm planting, fertilizing or harvesting most anything.

I just put in grapes, blueberries, blackberries, honeysuckle, clematis and the only book I referred to was this one. Never intimidating, always helpful, if I could only have one gardening book, this would be it.

Barbara Damrosch has written the tour de force in practical gardening handbooks for the novice and green-thumbed alike.

What is truly impressive in the book is how Damrosch manages to cover so much gardening acreage in one mid-sized book. There are chapters on landscape planning, plant care, gear, buying tips, annuals, perennials, vegetables, herbs, fruits, bulbs, roses, lawns and ground covers, vines, shrubs, trees, wildflowers, and even house plants. Whew...that was a list. Though it would seem with such an exhaustive table of contents that maybe the gardening reader would get to know far too little about a lot, such is not the case. Once you are done reading trees per say, you feel like you got a fairly thorough branching of the woody subject.

Though, if you are solely interested in vegetable gardening let's say, there are more detailed and exhaustive books out there, but chances are someday you will tire of rhubarbs and radishes and get the thorny point to plant a rose or two, you will find on that piercing day that you pine to have bought Damrosch's green bible.

I reach for this book time and time again with dirt-caked hands. Before you sow and grow, be well-read and what a better place to start than Damrosch's "Garden Primer."

If you have never done any kind of gardening before, buy this book before you ever touch your ground. Not only is it helpful as a reference book, but the information is presented in a way that makes it a good read and fun to learn. If you have a garden, this is a must have. There might be better books on specific plants or topics, but there is no better all around gardening book.

This is one of the frequently-quoted "classics" in the field of firearms literature (first edition was in 1971). But even a classic deserves a critical review, such as to determine its (remaining) usefulness, and its strengthes and weaknesses.

This book is not a true encyclopedia of rifles; for such a purpose, a work like John Walter's "Rifles of the World" (or, formerly, W.H.B. Smith's now outdated "Book of Rifles") would be more comprehensive. It is mainly a thorough (528 pp.) technical treatise on most of the major military (17) and civilian (56) rifle actions. Its strength lies in the very good and very thorough technical descriptions, instructions for disassembly, hints for reworking and sporterizing. Nevertheless, the book also contains a remarkable amount of historical and general information; it is therefore suitable not only for the professional and amateur gunsmith, but also for any hunter or collector who wishes to gain a more thorough understanding of his gun, and who contemplates acquiring a new one.

De Haas' language is clear and simple, not without an occasional touch of humour. The author's modesty and willingness to acknowledge some limits of knowledge in such a vast field are remarkable and greatly underline his general credibility and experience.

Small drawbacks of the book are the generally mediocre quality of illustrations (while often okay, they are sometimes dark, sometimes downright blotchy). The bibliography is limited to articles in the "American Rifleman" and "Gun Digest", and an expanded edition would be appreciated. And some commercial German rifle actions might be added.

I have the older 2nd edition of this book, and it is one of the most dog-eared volumes in my library.

Sometimes the author is not quite as technical as I might like. For example, he frequently asserts that this or that old military action "must have been" made out of high-grade steel without having done any actual analysis or even hardness testing of the material in question. But, his descriptions do convey at least as much information about the many designs covered as I would have gotten if I had the chance to disassemble and study them all myself. I don't have a hardness tester either.

The book is generally well written and fun to read.

If you're thinking about buying a modern sporting rifle, you might want to read this and compare the various designs before you lay down your money. If you enjoy sporterizing old military junkers, collecting old military classics, or just lurking around gun shows, you need this book.

If you already own one rifle and will never buy another, don't bother. Reading this would be like reading Road&Track after buying your only new car for the next ten years. If you're only going to buy one rifle and know it well, or if you collect, or especially if you are considering a conversion of an old ex-military bolt action into a sporter, you need this book. It provides an in-depth analysis of not just how rifle actions are designed, but their suitability for customization, what cartridges they can and cannot be converted to, etc. The author restocked, scoped, honed, rebarreled, or otherwise upgraded all of the common actions in the book (and many of the less common ones too). Since these upgrades are what most hunters are interested in, the book in invaluable before dropping money on changes. It is not a gunsmithing how-to, but gives the detail you will need to speak intelligently to your gunsmith and understand his/her suggestions and objections. If you are looking for a good read, you can read the history of each action, skip the assembly/disassembly and design analysis, and then read the conclusions on conversion or upgrades. Later when a greasy old war trophy follows you home from a gun show, you can eagerly lap up every detail from receiver ring to tang.

To my knowledge this is the first book to appear focusing on analysis of microarray images, though the topic is commonly addressed to some extent in general books on microarray technology. Because microarray technology evolves so quickly, books such as this one are almost of necessity put together in a hurry. Unfortunately, the hurry really shows in this case. In addition to the grammatical problems all too common in scientific texts, there are technical inconsistencies. For example, the term "signal to noise ratio" is defined at three places in the book, with three different definitions. First, we are told (chapter two, page 38) that the signal to noise ratio is defined as the ratio of mean signal to mean error. Later (chapter five, page 86), the signal to noise ratio is defined as signal (minus background), divided by the standard deviation of background. Finally (chapter six, page 101) tells us that the signal to noise ratio "can be estimated by computing the peak signal divided by the variation in the signal." Only that part of the discussion starting on page 86 is included in the index.

Chapter one provides an introduction to microarrays. Chapter two introduces image analysis with a focus on issues pertinent to micro array analysis, though it is not perfectly customized as background for the other chapters. For example, though Chapter two's appendixes include Fourier analysis, this is not really used explicitly further in the book. The next three chapters concern microarray scanning. They are each written by groups at different commercial firms, and they provide vendor oriented views. These chapters are redundant in the sense that they all cover the same topic, but taken as a whole, they provide some balance. It might be preferable to have an academic team write a single, more objective chapter, but it's understandable to take this approach in the interest of timeliness. Chapters six and seven are the ones that directly address image processing. Though Chapter seven is entitled "microarray data normalization", it really provides the most detailed information about image processing and analysis. Two short chapters cover a comparison of commercially available software and a brief overview of information workflow. The final chapter on bacterial artificial chromosomes is a general (and worthwhile) overview of that application, but it is not particularly focused on image analysis.

The book is concise (it took me about eight hours to read it cover to cover) and the price is right (under $30 at amazon.com). The editors and author are to be congratulated on producing a timely book, and I'm delighted that the publisher has made it so affordable. Keep up the good work.

DNA microarrays form an indispensable tool in molecular biology, allowing researchers to gain insight into the intricate mechanisms of gene expression. Microarray technology also aids the researcher in transforming and supplementing data available on genes and cells into useful information about gene expression, and ultimately, cellular biology.
cDNA arrays experiments use many gene-specific polynucleotides derived from the ends of RNA transcripts. These are arrayed on a single matrix and simultaneously probed with a fluorescently tagged cDNA representation of total RNA pools from test and reference cells. This allows one to determine the relative amount of transcript present in the pool by the type of fluorescent signal generated. Thus, the relative message abundance is based on a comparison of the test cell state to a reference cell state. Common to all array-based technologies is the need to analyze digital images of the scanned DNA array.
Shishir Shah is an Associate Professor at Wayne State University in Detroit, and is the author of numerous publications on image analysis and data mining, while Gerda Kamberova is an Assistant Professor in Computer Science at Hofstra University, New York, where she teaches computer vision, computer graphics, and artificial intelligence. With this book, the authors address the fact that the topic of microarray image processing is usually neglected due to the availability of various software tools for image processing. The focus of microarray bioinformatics today is data analysis, but how can one be certain that the data obtained through image analysis of a microarray experiment through is of high quality? How can one perform data mining on data derived from different microarray technologies, where microarray images were analyzed with different image analysis softwares?
In Kamberova's introductory chapter, she describes the basics of image analysis for molecular biology researchers. Although some of the formulas in her chapter may seem intimidating to many biologists, they are necessary to fully understand the subject. However, the mathematical load in this book is concentrated in this chapter, and the text thereafter becomes very friendly, with more advanced discussions saved for an appendix.
Chapters on the design and performance of CCD and laser microarray scanners serve as a forum for three companies representing a good cross-section of the technology in the microarray arena. The book then moves on to spot finding and segmentation issues with tips for practical image analysis. Quality control of image analysis is discussed at the application level.
Elsewhere, Kamberova and Shah have invited a team from Fox Chase Cancer Center to discuss aspects of image background corrections and data normalization. Another interesting aspect of this publication is the inclusion of statistical comparison of data generated by various softwares. Finally, Shah's chapter on BAC arrays and image analysis is of particular interest because it is a new application gaining momentum in the microarray field.
This book emphasizes aspects of both theory and application and therefore, can be used for teaching as well as self-study. It will be a useful reference not only for computer and biology scientists, but also for anyone using or interested in microarray technology.

DNA Array Image Analysis is the most comprehensive book that I have read, dealing with Microarray analysis topic. My background is in genomics, which is too far away from statistics. Nevertheless, this book gave me a very nice perspective on statistical approaches for microarrays. Recommend it to all, especially for those who are running microarray facilities.

Well, the title says it -- I'm keeping my copy of the 3rd edition because the illos in the latest edition look soft and disturbingly unsharp. Maybe the publisher, having lost the original artwork for the 3rd edition, simply scanned a copy. Or maybe the quality got skimped when the work was made all-electronic. I don't know.

In any case, the content is fine.

This book provides a very good coverage on Earthquakes, from how and why they happen to their effects and safety concerns. You can learn about faults, plates, how earthquakes are sized, how much can be forecasted, how structures are affected, ground acceleration, soil conditions, etc. Though there are numerous examples from California, this is not one of those books which try to provide earthquake checklists to Californians. The level of technicality is one reason I recommend the book. You don't have to be a seismologist to understand the book, but you won't get bored if you are technically oriented. You will get a quantitative feel of concepts in addition to the clear explanations.

The new 4th edition has a new chapter on Plate Tectonics,recent earthquake descriptions,connections with Web pages,and colored illustrative plates.Fresh historical text has been included and more help with seismic safety.

To begin, I believe that books are an inadequate didactic medium within the martial arts world; only a live instructor can point out the subtleties and variations in the motions of the arts. However, many books, this included, are a valuable resource to practitioners.

Although the greater part of the book was very thorough, I have some caveats about those parts which are not as acceptable. The beginning covers a brief history of Chinese swords (mainly of the jian variety). I'm not sure if this is a misconception by the author or a mistake in editing, but some of the pictures misrepresent the weapons they are supposed to illustrate; a slight rearrangement would fix this in most instances, but the fact that they are not arranged properly may result in trouble for the less cautious reader, or for the amateur. I further disagree with some of Yang's descriptions of the jian; the paragraph about the "blood groove" in especial. Although he is a respected martial artist, I maintain that those writers who know little about the weapon itself should write less; knowledge of its use does not, in many cases, signify knowledge of construction/history.

Yang does not go into as much detail as I would like in some aspects; the martial merit of some techniques should be explained more deeply. In many cases, he suffices to say that these techniques were efficient and worked, but did not really provide any reason besides vague references to balance or qi.

However, I am impressed with the thoroughness with which Yang tackles the subject. He covers basic stances, guards, and attacks, and depicts three very detailed forms (he dedicates approximately 100 pages to the first!). I was also pleased to note that he included the hanzi for many of the terms he uses, although he uses the English translation of the terms throughout the text rather than the Pinyin; e.g. he would refer to the Horse Stance rather than to Ma Bu. As something of a purist, I would rather see the Chinese than the English, but some may prefer the contrary.

One last point with which I was pleased was his enthusiasm to warn the reader that his book is NOT a comprehensive manual, and that actual instruction is required to reach any real level of skill in jianshu. I agree with this whole-heartedly. Even though this book is excellent for beginners, no beginner should rely solely on it to attain skill.

Overall, a very decent book indeed; certainly worth a look, and a good foundation for building new skills or for refreshing old skills.

History, Exercises and Forms are all in this book. I believe it has 3 complete forms. The forms are easy to follow and I recommend this book to anyone who is looking for a good sword book.

I found this book is the most comprehensive guide to learn Shaolin Sword. The picture and the explanation are clear and detail. I recommend this book for sword practisioner. I hope someday Dr. Yang will also produce "Southern Shaolin Sword" book.